diff options
| -rw-r--r-- | config/kitty/kitty.conf | 1481 | ||||
| -rw-r--r-- | home/vimrc | 43 |
2 files changed, 1510 insertions, 14 deletions
diff --git a/config/kitty/kitty.conf b/config/kitty/kitty.conf new file mode 100644 index 0000000..df2803b --- /dev/null +++ b/config/kitty/kitty.conf @@ -0,0 +1,1481 @@ +# vim:fileencoding=utf-8:foldmethod=marker + +#: Fonts {{{ + +#: kitty has very powerful font management. You can configure +#: individual font faces and even specify special fonts for particular +#: characters. + +font_family SauceCodePro Nerd Font +# bold_font auto +# italic_font auto +# bold_italic_font auto + +#: You can specify different fonts for the bold/italic/bold-italic +#: variants. To get a full list of supported fonts use the `kitty +#: list-fonts` command. By default they are derived automatically, by +#: the OSes font system. Setting them manually is useful for font +#: families that have many weight variants like Book, Medium, Thick, +#: etc. For example:: + +#: font_family Operator Mono Book +#: bold_font Operator Mono Medium +#: italic_font Operator Mono Book Italic +#: bold_italic_font Operator Mono Medium Italic + +font_size 14.0 + +#: Font size (in pts) + +# force_ltr no + +#: kitty does not support BIDI (bidirectional text), however, for RTL +#: scripts, words are automatically displayed in RTL. That is to say, +#: in an RTL script, the words "HELLO WORLD" display in kitty as +#: "WORLD HELLO", and if you try to select a substring of an RTL- +#: shaped string, you will get the character that would be there had +#: the the string been LTR. For example, assuming the Hebrew word +#: ירושלים, selecting the character that on the screen appears to be ם +#: actually writes into the selection buffer the character י. kitty's +#: default behavior is useful in conjunction with a filter to reverse +#: the word order, however, if you wish to manipulate RTL glyphs, it +#: can be very challenging to work with, so this option is provided to +#: turn it off. Furthermore, this option can be used with the command +#: line program GNU FriBidi +#: <https://github.com/fribidi/fribidi#executable> to get BIDI +#: support, because it will force kitty to always treat the text as +#: LTR, which FriBidi expects for terminals. + +# adjust_line_height 0 +# adjust_column_width 0 + +#: Change the size of each character cell kitty renders. You can use +#: either numbers, which are interpreted as pixels or percentages +#: (number followed by %), which are interpreted as percentages of the +#: unmodified values. You can use negative pixels or percentages less +#: than 100% to reduce sizes (but this might cause rendering +#: artifacts). + +# adjust_baseline 0 + +#: Adjust the vertical alignment of text (the height in the cell at +#: which text is positioned). You can use either numbers, which are +#: interpreted as pixels or a percentages (number followed by %), +#: which are interpreted as the percentage of the line height. A +#: positive value moves the baseline up, and a negative value moves +#: them down. The underline and strikethrough positions are adjusted +#: accordingly. + +# symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols + +#: Map the specified unicode codepoints to a particular font. Useful +#: if you need special rendering for some symbols, such as for +#: Powerline. Avoids the need for patched fonts. Each unicode code +#: point is specified in the form U+<code point in hexadecimal>. You +#: can specify multiple code points, separated by commas and ranges +#: separated by hyphens. symbol_map itself can be specified multiple +#: times. Syntax is:: + +#: symbol_map codepoints Font Family Name + +# disable_ligatures never + +#: Choose how you want to handle multi-character ligatures. The +#: default is to always render them. You can tell kitty to not render +#: them when the cursor is over them by using cursor to make editing +#: easier, or have kitty never render them at all by using always, if +#: you don't like them. The ligature strategy can be set per-window +#: either using the kitty remote control facility or by defining +#: shortcuts for it in kitty.conf, for example:: + +#: map alt+1 disable_ligatures_in active always +#: map alt+2 disable_ligatures_in all never +#: map alt+3 disable_ligatures_in tab cursor + +#: Note that this refers to programming ligatures, typically +#: implemented using the calt OpenType feature. For disabling general +#: ligatures, use the font_features setting. + +# font_features none + +#: Choose exactly which OpenType features to enable or disable. This +#: is useful as some fonts might have features worthwhile in a +#: terminal. For example, Fira Code Retina includes a discretionary +#: feature, zero, which in that font changes the appearance of the +#: zero (0), to make it more easily distinguishable from Ø. Fira Code +#: Retina also includes other discretionary features known as +#: Stylistic Sets which have the tags ss01 through ss20. + +#: For the exact syntax to use for individual features, see the +#: Harfbuzz documentation <https://harfbuzz.github.io/harfbuzz-hb- +#: common.html#hb-feature-from-string>. + +#: Note that this code is indexed by PostScript name, and not the font +#: family. This allows you to define very precise feature settings; +#: e.g. you can disable a feature in the italic font but not in the +#: regular font. + +#: On Linux, these are read from the FontConfig database first and +#: then this, setting is applied, so they can be configured in a +#: single, central place. + +#: To get the PostScript name for a font, use kitty + list-fonts +#: --psnames: + +#: .. code-block:: sh + +#: $ kitty + list-fonts --psnames | grep Fira +#: Fira Code +#: Fira Code Bold (FiraCode-Bold) +#: Fira Code Light (FiraCode-Light) +#: Fira Code Medium (FiraCode-Medium) +#: Fira Code Regular (FiraCode-Regular) +#: Fira Code Retina (FiraCode-Retina) + +#: The part in brackets is the PostScript name. + +#: Enable alternate zero and oldstyle numerals:: + +#: font_features FiraCode-Retina +zero +onum + +#: Enable only alternate zero:: + +#: font_features FiraCode-Retina +zero + +#: Disable the normal ligatures, but keep the calt feature which (in +#: this font) breaks up monotony:: + +#: font_features TT2020StyleB-Regular -liga +calt + +#: In conjunction with force_ltr, you may want to disable Arabic +#: shaping entirely, and only look at their isolated forms if they +#: show up in a document. You can do this with e.g.:: + +#: font_features UnifontMedium +isol -medi -fina -init + +# box_drawing_scale 0.001, 1, 1.5, 2 + +#: Change the sizes of the lines used for the box drawing unicode +#: characters These values are in pts. They will be scaled by the +#: monitor DPI to arrive at a pixel value. There must be four values +#: corresponding to thin, normal, thick, and very thick lines. + +#: }}} + +#: Cursor customization {{{ + +# cursor #cccccc + +#: Default cursor color + +# cursor_text_color #111111 + +#: Choose the color of text under the cursor. If you want it rendered +#: with the background color of the cell underneath instead, use the +#: special keyword: background + +# cursor_shape block + +#: The cursor shape can be one of (block, beam, underline). Note that +#: when reloading the config this will be changed only if the cursor +#: shape has not been set by the program running in the terminal. + +# cursor_beam_thickness 1.5 + +#: Defines the thickness of the beam cursor (in pts) + +# cursor_underline_thickness 2.0 + +#: Defines the thickness of the underline cursor (in pts) + +# cursor_blink_interval -1 + +#: The interval (in seconds) at which to blink the cursor. Set to zero +#: to disable blinking. Negative values mean use system default. Note +#: that numbers smaller than repaint_delay will be limited to +#: repaint_delay. + +# cursor_stop_blinking_after 15.0 + +#: Stop blinking cursor after the specified number of seconds of +#: keyboard inactivity. Set to zero to never stop blinking. + +#: }}} + +#: Scrollback {{{ + +# scrollback_lines 2000 + +#: Number of lines of history to keep in memory for scrolling back. +#: Memory is allocated on demand. Negative numbers are (effectively) +#: infinite scrollback. Note that using very large scrollback is not +#: recommended as it can slow down performance of the terminal and +#: also use large amounts of RAM. Instead, consider using +#: scrollback_pager_history_size. Note that on config reload if this +#: is changed it will only affect newly created windows, not existing +#: ones. + +# scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER + +#: Program with which to view scrollback in a new window. The +#: scrollback buffer is passed as STDIN to this program. If you change +#: it, make sure the program you use can handle ANSI escape sequences +#: for colors and text formatting. INPUT_LINE_NUMBER in the command +#: line above will be replaced by an integer representing which line +#: should be at the top of the screen. Similarly CURSOR_LINE and +#: CURSOR_COLUMN will be replaced by the current cursor position. + +# scrollback_pager_history_size 0 + +#: Separate scrollback history size, used only for browsing the +#: scrollback buffer (in MB). This separate buffer is not available +#: for interactive scrolling but will be piped to the pager program +#: when viewing scrollback buffer in a separate window. The current +#: implementation stores the data in UTF-8, so approximatively 10000 +#: lines per megabyte at 100 chars per line, for pure ASCII text, +#: unformatted text. A value of zero or less disables this feature. +#: The maximum allowed size is 4GB. Note that on config reload if this +#: is changed it will only affect newly created windows, not existing +#: ones. + +# scrollback_fill_enlarged_window no + +#: Fill new space with lines from the scrollback buffer after +#: enlarging a window. + +# wheel_scroll_multiplier 5.0 + +#: Modify the amount scrolled by the mouse wheel. Note this is only +#: used for low precision scrolling devices, not for high precision +#: scrolling on platforms such as macOS and Wayland. Use negative +#: numbers to change scroll direction. + +# touch_scroll_multiplier 1.0 + +#: Modify the amount scrolled by a touchpad. Note this is only used +#: for high precision scrolling devices on platforms such as macOS and +#: Wayland. Use negative numbers to change scroll direction. + +#: }}} + +#: Mouse {{{ + +# mouse_hide_wait 3.0 + +#: Hide mouse cursor after the specified number of seconds of the +#: mouse not being used. Set to zero to disable mouse cursor hiding. +#: Set to a negative value to hide the mouse cursor immediately when +#: typing text. Disabled by default on macOS as getting it to work +#: robustly with the ever-changing sea of bugs that is Cocoa is too +#: much effort. + +# url_color #0087bd +# url_style curly + +#: The color and style for highlighting URLs on mouse-over. url_style +#: can be one of: none, single, double, curly + +# open_url_with default + +#: The program with which to open URLs that are clicked on. The +#: special value default means to use the operating system's default +#: URL handler. + +# url_prefixes http https file ftp gemini irc gopher mailto news git + +#: The set of URL prefixes to look for when detecting a URL under the +#: mouse cursor. + +# detect_urls yes + +#: Detect URLs under the mouse. Detected URLs are highlighted with an +#: underline and the mouse cursor becomes a hand over them. Even if +#: this option is disabled, URLs are still clickable. + +# url_excluded_characters + +#: Additional characters to be disallowed from URLs, when detecting +#: URLs under the mouse cursor. By default, all characters legal in +#: URLs are allowed. + +copy_on_select clipboard + +#: Copy to clipboard or a private buffer on select. With this set to +#: clipboard, simply selecting text with the mouse will cause the text +#: to be copied to clipboard. Useful on platforms such as macOS that +#: do not have the concept of primary selections. You can instead +#: specify a name such as a1 to copy to a private kitty buffer +#: instead. Map a shortcut with the paste_from_buffer action to paste +#: from this private buffer. For example:: + +#: map cmd+shift+v paste_from_buffer a1 + +#: Note that copying to the clipboard is a security risk, as all +#: programs, including websites open in your browser can read the +#: contents of the system clipboard. + +# strip_trailing_spaces never + +#: Remove spaces at the end of lines when copying to clipboard. A +#: value of smart will do it when using normal selections, but not +#: rectangle selections. always will always do it. + +# select_by_word_characters @-./_~?&=%+# + +#: Characters considered part of a word when double clicking. In +#: addition to these characters any character that is marked as an +#: alphanumeric character in the unicode database will be matched. + +# click_interval -1.0 + +#: The interval between successive clicks to detect double/triple +#: clicks (in seconds). Negative numbers will use the system default +#: instead, if available, or fallback to 0.5. + +# focus_follows_mouse no + +#: Set the active window to the window under the mouse when moving the +#: mouse around + +# pointer_shape_when_grabbed arrow + +#: The shape of the mouse pointer when the program running in the +#: terminal grabs the mouse. Valid values are: arrow, beam and hand + +# default_pointer_shape beam + +#: The default shape of the mouse pointer. Valid values are: arrow, +#: beam and hand + +# pointer_shape_when_dragging beam + +#: The default shape of the mouse pointer when dragging across text. +#: Valid values are: arrow, beam and hand + +#: Mouse actions {{{ + +#: Mouse buttons can be remapped to perform arbitrary actions. The +#: syntax for doing so is: + +#: .. code-block:: none + +#: mouse_map button-name event-type modes action + +#: Where ``button-name`` is one of ``left``, ``middle``, ``right`` or +#: ``b1 ... b8`` with added keyboard modifiers, for example: +#: ``ctrl+shift+left`` refers to holding the ctrl+shift keys while +#: clicking with the left mouse button. The number ``b1 ... b8`` can +#: be used to refer to upto eight buttons on a mouse. + +#: ``event-type`` is one ``press``, ``release``, ``doublepress``, +#: ``triplepress``, ``click`` and ``doubleclick``. ``modes`` +#: indicates whether the action is performed when the mouse is grabbed +#: by the program running in the terminal, or not. It can have one or +#: more or the values, ``grabbed,ungrabbed``. ``grabbed`` refers to +#: when the program running in the terminal has requested mouse +#: events. Note that the click and double click events have a delay of +#: click_interval to disambiguate from double and triple presses. + +#: You can run kitty with the kitty --debug-input command line option +#: to see mouse events. See the builtin actions below to get a sense +#: of what is possible. + +#: If you want to unmap an action map it to ``no-op``. For example, to +#: disable opening of URLs with a plain click:: + +#: mouse_map left click ungrabbed no-op + +#: .. note:: +#: Once a selection is started, releasing the button that started it will +#: automatically end it and no release event will be dispatched. + +# clear_all_mouse_actions no + +#: You can have kitty remove all mouse actions seen up to this point. +#: Useful, for instance, to remove the default mouse actions. + +# mouse_map left click ungrabbed mouse_click_url_or_select +# mouse_map shift+left click grabbed,ungrabbed mouse_click_url_or_select +# mouse_map ctrl+shift+left release grabbed,ungrabbed mouse_click_url + +#: Variant with ctrl+shift is present because the simple click based +#: version has an unavoidable delay of click_interval, to disambiguate +#: clicks from double clicks. + +# mouse_map ctrl+shift+left press grabbed discard_event + +#: Prevent this press event from being sent to the program that has +#: grabbed the mouse, as the corresponding release event is used to +#: open a URL. + +# mouse_map middle release ungrabbed paste_from_selection +# mouse_map left press ungrabbed mouse_selection normal +# mouse_map ctrl+alt+left press ungrabbed mouse_selection rectangle +# mouse_map left doublepress ungrabbed mouse_selection word +# mouse_map left triplepress ungrabbed mouse_selection line + +#: Select the entire line + +# mouse_map ctrl+alt+left triplepress ungrabbed mouse_selection line_from_point + +#: Select from the clicked point to the end of the line + +# mouse_map right press ungrabbed mouse_selection extend + +#: If you want only the end of the selection to be moved instead of +#: the nearest boundary, use move-end instead of extend. + +# mouse_map shift+middle release ungrabbed,grabbed paste_selection +# mouse_map shift+left press ungrabbed,grabbed mouse_selection normal +# mouse_map shift+ctrl+alt+left press ungrabbed,grabbed mouse_selection rectangle +# mouse_map shift+left doublepress ungrabbed,grabbed mouse_selection word +# mouse_map shift+left triplepress ungrabbed,grabbed mouse_selection line + +#: Select the entire line + +# mouse_map shift+ctrl+alt+left triplepress ungrabbed,grabbed mouse_selection line_from_point + +#: Select from the clicked point to the end of the line + +# mouse_map shift+right press ungrabbed,grabbed mouse_selection extend +#: }}} + +#: }}} + +#: Performance tuning {{{ + +# repaint_delay 10 + +#: Delay (in milliseconds) between screen updates. Decreasing it, +#: increases frames-per-second (FPS) at the cost of more CPU usage. +#: The default value yields ~100 FPS which is more than sufficient for +#: most uses. Note that to actually achieve 100 FPS you have to either +#: set sync_to_monitor to no or use a monitor with a high refresh +#: rate. Also, to minimize latency when there is pending input to be +#: processed, repaint_delay is ignored. + +# input_delay 3 + +#: Delay (in milliseconds) before input from the program running in +#: the terminal is processed. Note that decreasing it will increase +#: responsiveness, but also increase CPU usage and might cause flicker +#: in full screen programs that redraw the entire screen on each loop, +#: because kitty is so fast that partial screen updates will be drawn. + +# sync_to_monitor yes + +#: Sync screen updates to the refresh rate of the monitor. This +#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) +#: when scrolling. However, it limits the rendering speed to the +#: refresh rate of your monitor. With a very high speed mouse/high +#: keyboard repeat rate, you may notice some slight input latency. If +#: so, set this to no. + +#: }}} + +#: Terminal bell {{{ + +enable_audio_bell no + +#: Enable/disable the audio bell. Useful in environments that require +#: silence. + +# visual_bell_duration 0.0 + +#: Visual bell duration. Flash the screen when a bell occurs for the +#: specified number of seconds. Set to zero to disable. + +# window_alert_on_bell yes + +#: Request window attention on bell. Makes the dock icon bounce on +#: macOS or the taskbar flash on linux. + +# bell_on_tab yes + +#: Show a bell symbol on the tab if a bell occurs in one of the +#: windows in the tab and the window is not the currently focused +#: window + +# command_on_bell none + +#: Program to run when a bell occurs. The environment variable +#: KITTY_CHILD_CMDLINE can be used to get the program running in the +#: window in which the bell occurred. + +#: }}} + +#: Window layout {{{ + +# remember_window_size yes +# initial_window_width 640 +# initial_window_height 400 + +#: If enabled, the window size will be remembered so that new +#: instances of kitty will have the same size as the previous +#: instance. If disabled, the window will initially have size +#: configured by initial_window_width/height, in pixels. You can use a +#: suffix of "c" on the width/height values to have them interpreted +#: as number of cells instead of pixels. + +# enabled_layouts * + +#: The enabled window layouts. A comma separated list of layout names. +#: The special value all means all layouts. The first listed layout +#: will be used as the startup layout. Default configuration is all +#: layouts in alphabetical order. For a list of available layouts, see +#: the https://sw.kovidgoyal.net/kitty/overview/#layouts. + +# window_resize_step_cells 2 +# window_resize_step_lines 2 + +#: The step size (in units of cell width/cell height) to use when +#: resizing windows. The cells value is used for horizontal resizing +#: and the lines value for vertical resizing. + +# window_border_width 0.5pt + +#: The width of window borders. Can be either in pixels (px) or pts +#: (pt). Values in pts will be rounded to the nearest number of pixels +#: based on screen resolution. If not specified the unit is assumed to +#: be pts. Note that borders are displayed only when more than one +#: window is visible. They are meant to separate multiple windows. + +# draw_minimal_borders yes + +#: Draw only the minimum borders needed. This means that only the +#: minimum needed borders for inactive windows are drawn. That is only +#: the borders that separate the inactive window from a neighbor. Note +#: that setting a non-zero window margin overrides this and causes all +#: borders to be drawn. + +# window_margin_width 0 + +#: The window margin (in pts) (blank area outside the border). A +#: single value sets all four sides. Two values set the vertical and +#: horizontal sides. Three values set top, horizontal and bottom. Four +#: values set top, right, bottom and left. + +# single_window_margin_width -1 + +#: The window margin (in pts) to use when only a single window is +#: visible. Negative values will cause the value of +#: window_margin_width to be used instead. A single value sets all +#: four sides. Two values set the vertical and horizontal sides. Three +#: values set top, horizontal and bottom. Four values set top, right, +#: bottom and left. + +# window_padding_width 0 + +#: The window padding (in pts) (blank area between the text and the +#: window border). A single value sets all four sides. Two values set +#: the vertical and horizontal sides. Three values set top, horizontal +#: and bottom. Four values set top, right, bottom and left. + +# placement_strategy center + +#: When the window size is not an exact multiple of the cell size, the +#: cell area of the terminal window will have some extra padding on +#: the sides. You can control how that padding is distributed with +#: this option. Using a value of center means the cell area will be +#: placed centrally. A value of top-left means the padding will be on +#: only the bottom and right edges. + +# active_border_color #00ff00 + +#: The color for the border of the active window. Set this to none to +#: not draw borders around the active window. + +# inactive_border_color #cccccc + +#: The color for the border of inactive windows + +# bell_border_color #ff5a00 + +#: The color for the border of inactive windows in which a bell has +#: occurred + +# inactive_text_alpha 1.0 + +#: Fade the text in inactive windows by the specified amount (a number +#: between zero and one, with zero being fully faded). + +# hide_window_decorations no + +#: Hide the window decorations (title-bar and window borders) with +#: yes. On macOS, titlebar-only can be used to only hide the titlebar. +#: Whether this works and exactly what effect it has depends on the +#: window manager/operating system. Note that the effects of changing +#: this setting when reloading config are undefined. + +# resize_debounce_time 0.1 + +#: The time (in seconds) to wait before redrawing the screen when a +#: resize event is received. On platforms such as macOS, where the +#: operating system sends events corresponding to the start and end of +#: a resize, this number is ignored. + +# resize_draw_strategy static + +#: Choose how kitty draws a window while a resize is in progress. A +#: value of static means draw the current window contents, mostly +#: unchanged. A value of scale means draw the current window contents +#: scaled. A value of blank means draw a blank window. A value of size +#: means show the window size in cells. + +# resize_in_steps no + +#: Resize the OS window in steps as large as the cells, instead of +#: with the usual pixel accuracy. Combined with an +#: initial_window_width and initial_window_height in number of cells, +#: this option can be used to keep the margins as small as possible +#: when resizing the OS window. Note that this does not currently work +#: on Wayland. + +# confirm_os_window_close 0 + +#: Ask for confirmation when closing an OS window or a tab that has at +#: least this number of kitty windows in it. A value of zero disables +#: confirmation. This confirmation also applies to requests to quit +#: the entire application (all OS windows, via the quit action). + +#: }}} + +#: Tab bar {{{ + +# tab_bar_edge bottom + +#: Which edge to show the tab bar on, top or bottom + +# tab_bar_margin_width 0.0 + +#: The margin to the left and right of the tab bar (in pts) + +# tab_bar_margin_height 0.0 0.0 + +#: The margin above and below the tab bar (in pts). The first number +#: is the margin between the edge of the OS Window and the tab bar and +#: the second number is the margin between the tab bar and the +#: contents of the current tab. + +# tab_bar_style fade + +#: The tab bar style, can be one of: + +#: fade +#: Each tab's edges fade into the background color (see tab_fade) +#: slant +#: Tabs look like the tabs in a physical file +#: separator +#: Tabs are separated by a configurable separator (see tab_separator) +#: powerline +#: Tabs are shown as a continuous line with "fancy" separators (see tab_powerline_style) +#: hidden +#: The tab bar is hidden. If you use this, you might want to create a mapping +#: for the https://sw.kovidgoyal.net/kitty/actions/#select-tab action which presents you with a list +#: of tabs and allows for easy switching to a tab. + +# tab_bar_min_tabs 2 + +#: The minimum number of tabs that must exist before the tab bar is +#: shown + +# tab_switch_strategy previous + +#: The algorithm to use when switching to a tab when the current tab +#: is closed. The default of previous will switch to the last used +#: tab. A value of left will switch to the tab to the left of the +#: closed tab. A value of right will switch to the tab to the right of +#: the closed tab. A value of last will switch to the right-most tab. + +# tab_fade 0.25 0.5 0.75 1 + +#: Control how each tab fades into the background when using fade for +#: the tab_bar_style. Each number is an alpha (between zero and one) +#: that controls how much the corresponding cell fades into the +#: background, with zero being no fade and one being full fade. You +#: can change the number of cells used by adding/removing entries to +#: this list. + +# tab_separator " ┇" + +#: The separator between tabs in the tab bar when using separator as +#: the tab_bar_style. + +# tab_powerline_style round + +#: The powerline separator style between tabs in the tab bar when +#: using powerline as the tab_bar_style, can be one of: angled, +#: slanted, or round. + +# tab_activity_symbol none + +#: Some text or a unicode symbol to show on the tab if a window in the +#: tab that does not have focus has some activity. If you want to use +#: leading or trailing spaces surround the text with quotes. + +# tab_title_template "{title}" + +#: A template to render the tab title. The default just renders the +#: title. If you wish to include the tab-index as well, use something +#: like: {index}: {title}. Useful if you have shortcuts mapped for +#: goto_tab N. If you prefer to see the index as a superscript, use +#: {sup.index}. In addition you can use {layout_name} for the current +#: layout name, {num_windows} for the number of windows in the tab and +#: {num_window_groups} for the number of window groups (not counting +#: overlay windows) in the tab. Note that formatting is done by +#: Python's string formatting machinery, so you can use, for instance, +#: {layout_name[:2].upper()} to show only the first two letters of the +#: layout name, upper-cased. If you want to style the text, you can +#: use styling directives, for example: +#: {fmt.fg.red}red{fmt.fg.default}normal{fmt.bg._00FF00}green +#: bg{fmt.bg.normal}. Similarly, for bold and italic: +#: {fmt.bold}bold{fmt.nobold}normal{fmt.italic}italic{fmt.noitalic}. + +# active_tab_title_template none + +#: Template to use for active tabs, if not specified falls back to +#: tab_title_template. + +# active_tab_foreground #000 +# active_tab_background #eee +# active_tab_font_style bold-italic +# inactive_tab_foreground #444 +# inactive_tab_background #999 +# inactive_tab_font_style normal + +#: Tab bar colors and styles + +# tab_bar_background none + +#: Background color for the tab bar. Defaults to using the terminal +#: background color. + +#: }}} + +#: Color scheme {{{ + +# foreground #dddddd +# background #000000 + +#: The foreground and background colors + +# background_opacity 1.0 + +#: The opacity of the background. A number between 0 and 1, where 1 is +#: opaque and 0 is fully transparent. This will only work if +#: supported by the OS (for instance, when using a compositor under +#: X11). Note that it only sets the background color's opacity in +#: cells that have the same background color as the default terminal +#: background. This is so that things like the status bar in vim, +#: powerline prompts, etc. still look good. But it means that if you +#: use a color theme with a background color in your editor, it will +#: not be rendered as transparent. Instead you should change the +#: default background color in your kitty config and not use a +#: background color in the editor color scheme. Or use the escape +#: codes to set the terminals default colors in a shell script to +#: launch your editor. Be aware that using a value less than 1.0 is a +#: (possibly significant) performance hit. If you want to dynamically +#: change transparency of windows set dynamic_background_opacity to +#: yes (this is off by default as it has a performance cost). Changing +#: this setting when reloading the config will only work if +#: dynamic_background_opacity was enabled in the original config. + +# background_image none + +#: Path to a background image. Must be in PNG format. + +# background_image_layout tiled + +#: Whether to tile or scale the background image. + +# background_image_linear no + +#: When background image is scaled, whether linear interpolation +#: should be used. + +# dynamic_background_opacity no + +#: Allow changing of the background_opacity dynamically, using either +#: keyboard shortcuts (increase_background_opacity and +#: decrease_background_opacity) or the remote control facility. +#: Changing this setting by reloading the config is not supported. + +# background_tint 0.0 + +#: How much to tint the background image by the background color. The +#: tint is applied only under the text area, not margin/borders. Makes +#: it easier to read the text. Tinting is done using the current +#: background color for each window. This setting applies only if +#: background_opacity is set and transparent windows are supported or +#: background_image is set. + +# dim_opacity 0.75 + +#: How much to dim text that has the DIM/FAINT attribute set. One +#: means no dimming and zero means fully dimmed (i.e. invisible). + +# selection_foreground #000000 + +#: The foreground for text selected with the mouse. A value of none +#: means to leave the color unchanged. + +# selection_background #fffacd + +#: The background for text selected with the mouse. + +#: The color table {{{ + +# theme: Tempus Dawn +# author: Protesilaos Stavrou (https://protesilaos.com) +# description: Light theme with a soft, slightly desaturated palette (WCAG AA compliant) + +cursor #4a4b4e +cursor_text_color #eff0f2 +url_color #4b529a + +active_border_color #676364 +inactive_border_color #dee2e0 +bell_border_color #8b590a + +active_tab_foreground #206620 +active_tab_background #dee2e0 +inactive_tab_foreground #676364 +inactive_tab_background #eff0f2 + +foreground #4a4b4e +background #eff0f2 +selection_foreground #eff0f2 +selection_background #4a4b4e + +color0 #4a4b4e +color1 #a32a3a +color2 #206620 +color3 #745300 +color4 #4b529a +color5 #8d377e +color6 #086784 +color7 #dee2e0 +color8 #676364 +color9 #a64822 +color10 #187408 +color11 #8b590a +color12 #5c59b2 +color13 #8e45a8 +color14 #3f649c +color15 #eff0f2 + + +#: }}} + +#: }}} + +#: Advanced {{{ + +# shell . + +#: The shell program to execute. The default value of . means to use +#: whatever shell is set as the default shell for the current user. +#: Note that on macOS if you change this, you might need to add +#: --login and --interactive to ensure that the shell starts in +#: interactive mode and reads its startup rc files. + +# editor . + +#: The terminal editor (such as ``vim`` or ``nano``) to use when +#: editing the kitty config file or similar tasks. + +#: The default value of . means to use the environment variables +#: VISUAL and EDITOR in that order. If these variables aren't set, +#: kitty will run your shell (``$SHELL -l -i -c env``) to see if your +#: shell config files set VISUAL or EDITOR. If that doesn't work, +#: kitty will cycle through various known editors (``vim``, ``emacs``, +#: etc) and take the first one that exists on your system. + +# close_on_child_death no + +#: Close the window when the child process (shell) exits. If no (the +#: default), the terminal will remain open when the child exits as +#: long as there are still processes outputting to the terminal (for +#: example disowned or backgrounded processes). If yes, the window +#: will close as soon as the child process exits. Note that setting it +#: to yes means that any background processes still using the terminal +#: can fail silently because their stdout/stderr/stdin no longer work. + +# allow_remote_control no + +#: Allow other programs to control kitty. If you turn this on other +#: programs can control all aspects of kitty, including sending text +#: to kitty windows, opening new windows, closing windows, reading the +#: content of windows, etc. Note that this even works over ssh +#: connections. You can chose to either allow any program running +#: within kitty to control it, with yes or only programs that connect +#: to the socket specified with the kitty --listen-on command line +#: option, if you use the value socket-only. The latter is useful if +#: you want to prevent programs running on a remote computer over ssh +#: from controlling kitty. Reloading the config will not affect this +#: setting. + +# listen_on none + +#: Tell kitty to listen to the specified unix/tcp socket for remote +#: control connections. Note that this will apply to all kitty +#: instances. It can be overridden by the kitty --listen-on command +#: line flag. This option accepts only UNIX sockets, such as +#: unix:${TEMP}/mykitty or (on Linux) unix:@mykitty. Environment +#: variables are expanded. If {kitty_pid} is present then it is +#: replaced by the PID of the kitty process, otherwise the PID of the +#: kitty process is appended to the value, with a hyphen. This option +#: is ignored unless you also set allow_remote_control to enable +#: remote control. See the help for kitty --listen-on for more +#: details. Changing this option by reloading the config is not +#: supported. + +# env + +#: Specify environment variables to set in all child processes. Note +#: that environment variables are expanded recursively, so if you +#: use:: + +#: env MYVAR1=a +#: env MYVAR2=${MYVAR1}/${HOME}/b + +#: The value of MYVAR2 will be a/<path to home directory>/b. + +# update_check_interval 24 + +#: Periodically check if an update to kitty is available. If an update +#: is found a system notification is displayed informing you of the +#: available update. The default is to check every 24 hrs, set to zero +#: to disable. Changing this option by reloading the config is not +#: supported. + +# startup_session none + +#: Path to a session file to use for all kitty instances. Can be +#: overridden by using the kitty --session command line option for +#: individual instances. See +#: https://sw.kovidgoyal.net/kitty/overview/#startup-sessions in the +#: kitty documentation for details. Note that relative paths are +#: interpreted with respect to the kitty config directory. Environment +#: variables in the path are expanded. Changing this option by +#: reloading the config is not supported. + +# clipboard_control write-clipboard write-primary + +#: Allow programs running in kitty to read and write from the +#: clipboard. You can control exactly which actions are allowed. The +#: set of possible actions is: write-clipboard read-clipboard write- +#: primary read-primary. The default is to allow writing to the +#: clipboard and primary selection. Note that enabling the read +#: functionality is a security risk as it means that any program, even +#: one running on a remote server via SSH can read your clipboard. See +#: also clipboard_max_size. + +# clipboard_max_size 64 + +#: The maximum size (in MB) of data from programs running in kitty +#: that will be stored for writing to the system clipboard. See also +#: clipboard_control. A value of zero means no size limit is applied. + +# allow_hyperlinks yes + +#: Process hyperlink (OSC 8) escape sequences. If disabled OSC 8 +#: escape sequences are ignored. Otherwise they become clickable +#: links, that you can click by holding down ctrl+shift and clicking +#: with the mouse. The special value of ``ask`` means that kitty will +#: ask before opening the link. + +# term xterm-kitty + +#: The value of the TERM environment variable to set. Changing this +#: can break many terminal programs, only change it if you know what +#: you are doing, not because you read some advice on Stack Overflow +#: to change it. The TERM variable is used by various programs to get +#: information about the capabilities and behavior of the terminal. If +#: you change it, depending on what programs you run, and how +#: different the terminal you are changing it to is, various things +#: from key-presses, to colors, to various advanced features may not +#: work. Changing this option by reloading the config will only affect +#: newly created windows. + +#: }}} + +#: OS specific tweaks {{{ + +# wayland_titlebar_color system + +#: Change the color of the kitty window's titlebar on Wayland systems +#: with client side window decorations such as GNOME. A value of +#: system means to use the default system color, a value of background +#: means to use the background color of the currently active window +#: and finally you can use an arbitrary color, such as #12af59 or red. + +# macos_titlebar_color system + +#: Change the color of the kitty window's titlebar on macOS. A value +#: of system means to use the default system color, a value of +#: background means to use the background color of the currently +#: active window and finally you can use an arbitrary color, such as +#: #12af59 or red. WARNING: This option works by using a hack, as +#: there is no proper Cocoa API for it. It sets the background color +#: of the entire window and makes the titlebar transparent. As such it +#: is incompatible with background_opacity. If you want to use both, +#: you are probably better off just hiding the titlebar with +#: hide_window_decorations. + +# macos_option_as_alt no + +#: Use the option key as an alt key. With this set to no, kitty will +#: use the macOS native Option+Key = unicode character behavior. This +#: will break any Alt+key keyboard shortcuts in your terminal +#: programs, but you can use the macOS unicode input technique. You +#: can use the values: left, right, or both to use only the left, +#: right or both Option keys as Alt, instead. Changing this setting by +#: reloading the config is not supported. + +# macos_hide_from_tasks no + +#: Hide the kitty window from running tasks (⌘+Tab) on macOS. Changing +#: this setting by reloading the config is not supported. + +# macos_quit_when_last_window_closed no + +#: Have kitty quit when all the top-level windows are closed. By +#: default, kitty will stay running, even with no open windows, as is +#: the expected behavior on macOS. + +# macos_window_resizable yes + +#: Disable this if you want kitty top-level (OS) windows to not be +#: resizable on macOS. Changing this setting by reloading the config +#: will only affect newly created windows. + +# macos_thicken_font 0 + +#: Draw an extra border around the font with the given width, to +#: increase legibility at small font sizes. For example, a value of +#: 0.75 will result in rendering that looks similar to sub-pixel +#: antialiasing at common font sizes. + +# macos_traditional_fullscreen no + +#: Use the traditional full-screen transition, that is faster, but +#: less pretty. + +# macos_show_window_title_in all + +#: Show or hide the window title in the macOS window or menu-bar. A +#: value of window will show the title of the currently active window +#: at the top of the macOS window. A value of menubar will show the +#: title of the currently active window in the macOS menu-bar, making +#: use of otherwise wasted space. all will show the title everywhere +#: and none hides the title in the window and the menu-bar. + +# macos_custom_beam_cursor no + +#: Enable/disable custom mouse cursor for macOS that is easier to see +#: on both light and dark backgrounds. WARNING: this might make your +#: mouse cursor invisible on dual GPU machines. Changing this setting +#: by reloading the config is not supported. + +# linux_display_server auto + +#: Choose between Wayland and X11 backends. By default, an appropriate +#: backend based on the system state is chosen automatically. Set it +#: to x11 or wayland to force the choice. Changing this setting by +#: reloading the config is not supported. + +#: }}} + +#: Keyboard shortcuts {{{ + +#: Keys are identified simply by their lowercase unicode characters. +#: For example: ``a`` for the A key, ``[`` for the left square bracket +#: key, etc. For functional keys, such as ``Enter or Escape`` the +#: names are present at https://sw.kovidgoyal.net/kitty/keyboard- +#: protocol/#functional-key-definitions. For a list of modifier names, +#: see: GLFW mods <https://www.glfw.org/docs/latest/group__mods.html> + +#: On Linux you can also use XKB key names to bind keys that are not +#: supported by GLFW. See XKB keys +#: <https://github.com/xkbcommon/libxkbcommon/blob/master/include/xkbcommon/xkbcommon- +#: keysyms.h> for a list of key names. The name to use is the part +#: after the XKB_KEY_ prefix. Note that you can only use an XKB key +#: name for keys that are not known as GLFW keys. + +#: Finally, you can use raw system key codes to map keys, again only +#: for keys that are not known as GLFW keys. To see the system key +#: code for a key, start kitty with the kitty --debug-input option. +#: Then kitty will output some debug text for every key event. In that +#: text look for ``native_code`` the value of that becomes the key +#: name in the shortcut. For example: + +#: .. code-block:: none + +#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a' + +#: Here, the key name for the A key is 0x61 and you can use it with:: + +#: map ctrl+0x61 something + +#: to map ctrl+a to something. + +#: You can use the special action no_op to unmap a keyboard shortcut +#: that is assigned in the default configuration:: + +#: map kitty_mod+space no_op + +#: You can combine multiple actions to be triggered by a single +#: shortcut, using the syntax below:: + +#: map key combine <separator> action1 <separator> action2 <separator> action3 ... + +#: For example:: + +#: map kitty_mod+e combine : new_window : next_layout + +#: this will create a new window and switch to the next available +#: layout + +#: You can use multi-key shortcuts using the syntax shown below:: + +#: map key1>key2>key3 action + +#: For example:: + +#: map ctrl+f>2 set_font_size 20 + +#: The full list of actions that can be mapped to key presses is +#: available here </actions>. + +# kitty_mod ctrl+shift + +#: The value of kitty_mod is used as the modifier for all default +#: shortcuts, you can change it in your kitty.conf to change the +#: modifiers for all the default shortcuts. + +# clear_all_shortcuts no + +#: You can have kitty remove all shortcut definition seen up to this +#: point. Useful, for instance, to remove the default shortcuts. + +# kitten_alias hints hints --hints-offset=0 + +#: You can create aliases for kitten names, this allows overriding the +#: defaults for kitten options and can also be used to shorten +#: repeated mappings of the same kitten with a specific group of +#: options. For example, the above alias changes the default value of +#: kitty +kitten hints --hints-offset to zero for all mappings, +#: including the builtin ones. + +#: Clipboard {{{ + +# map kitty_mod+c copy_to_clipboard + +#: There is also a copy_or_interrupt action that can be optionally +#: mapped to Ctrl+c. It will copy only if there is a selection and +#: send an interrupt otherwise. Similarly, copy_and_clear_or_interrupt +#: will copy and clear the selection or send an interrupt if there is +#: no selection. + +# map kitty_mod+v paste_from_clipboard +# map kitty_mod+s paste_from_selection +# map kitty_mod+o pass_selection_to_program + +#: You can also pass the contents of the current selection to any +#: program using pass_selection_to_program. By default, the system's +#: open program is used, but you can specify your own, the selection +#: will be passed as a command line argument to the program, for +#: example:: + +#: map kitty_mod+o pass_selection_to_program firefox + +#: You can pass the current selection to a terminal program running in +#: a new kitty window, by using the @selection placeholder:: + +#: map kitty_mod+y new_window less @selection + +#: }}} + +#: Scrolling {{{ + +# map kitty_mod+up scroll_line_up +# map kitty_mod+down scroll_line_down +# map kitty_mod+page_up scroll_page_up +# map kitty_mod+page_down scroll_page_down +# map kitty_mod+home scroll_home +# map kitty_mod+end scroll_end +# map kitty_mod+h show_scrollback + +#: You can pipe the contents of the current screen + history buffer as +#: STDIN to an arbitrary program using the ``launch`` function. For +#: example, the following opens the scrollback buffer in less in an +#: overlay window:: + +#: map f1 launch --stdin-source=@screen_scrollback --stdin-add-formatting --type=overlay less +G -R + +#: For more details on piping screen and buffer contents to external +#: programs, see launch. + +#: }}} + +#: Window management {{{ + +# map kitty_mod+enter new_window + +#: You can open a new window running an arbitrary program, for +#: example:: + +#: map kitty_mod+y launch mutt + +#: You can open a new window with the current working directory set to +#: the working directory of the current window using:: + +#: map ctrl+alt+enter launch --cwd=current + +#: You can open a new window that is allowed to control kitty via the +#: kitty remote control facility by prefixing the command line with @. +#: Any programs running in that window will be allowed to control +#: kitty. For example:: + +#: map ctrl+enter launch --allow-remote-control some_program + +#: You can open a new window next to the currently active window or as +#: the first window, with:: + +#: map ctrl+n launch --location=neighbor some_program +#: map ctrl+f launch --location=first some_program + +#: For more details, see launch. + +# map kitty_mod+n new_os_window + +#: Works like new_window above, except that it opens a top level OS +#: kitty window. In particular you can use new_os_window_with_cwd to +#: open a window with the current working directory. + +# map kitty_mod+w close_window +# map kitty_mod+] next_window +# map kitty_mod+[ previous_window +# map kitty_mod+f move_window_forward +# map kitty_mod+b move_window_backward +# map kitty_mod+` move_window_to_top +# map kitty_mod+r start_resizing_window +# map kitty_mod+1 first_window +# map kitty_mod+2 second_window +# map kitty_mod+3 third_window +# map kitty_mod+4 fourth_window +# map kitty_mod+5 fifth_window +# map kitty_mod+6 sixth_window +# map kitty_mod+7 seventh_window +# map kitty_mod+8 eighth_window +# map kitty_mod+9 ninth_window +# map kitty_mod+0 tenth_window +#: }}} + +#: Tab management {{{ + +# map kitty_mod+right next_tab +# map kitty_mod+left previous_tab +# map kitty_mod+t new_tab +# map kitty_mod+q close_tab +# map shift+cmd+w close_os_window +# map kitty_mod+. move_tab_forward +# map kitty_mod+, move_tab_backward +# map kitty_mod+alt+t set_tab_title + +#: You can also create shortcuts to go to specific tabs, with 1 being +#: the first tab, 2 the second tab and -1 being the previously active +#: tab, and any number larger than the last tab being the last tab:: + +#: map ctrl+alt+1 goto_tab 1 +#: map ctrl+alt+2 goto_tab 2 + +#: Just as with new_window above, you can also pass the name of +#: arbitrary commands to run when using new_tab and use +#: new_tab_with_cwd. Finally, if you want the new tab to open next to +#: the current tab rather than at the end of the tabs list, use:: + +#: map ctrl+t new_tab !neighbor [optional cmd to run] +#: }}} + +#: Layout management {{{ + +# map kitty_mod+l next_layout + +#: You can also create shortcuts to switch to specific layouts:: + +#: map ctrl+alt+t goto_layout tall +#: map ctrl+alt+s goto_layout stack + +#: Similarly, to switch back to the previous layout:: + +#: map ctrl+alt+p last_used_layout + +#: There is also a toggle layout function that switches to the named +#: layout or back to the previous layout if in the named layout. +#: Useful to temporarily "zoom" the active window by switching to the +#: stack layout:: + +#: map ctrl+alt+z toggle_layout stack +#: }}} + +#: Font sizes {{{ + +#: You can change the font size for all top-level kitty OS windows at +#: a time or only the current one. + +# map kitty_mod+equal change_font_size all +2.0 +# map kitty_mod+minus change_font_size all -2.0 +# map kitty_mod+backspace change_font_size all 0 + +#: To setup shortcuts for specific font sizes:: + +#: map kitty_mod+f6 change_font_size all 10.0 + +#: To setup shortcuts to change only the current OS window's font +#: size:: + +#: map kitty_mod+f6 change_font_size current 10.0 +#: }}} + +#: Select and act on visible text {{{ + +#: Use the hints kitten to select text and either pass it to an +#: external program or insert it into the terminal or copy it to the +#: clipboard. + +# map kitty_mod+e open_url_with_hints + +#: Open a currently visible URL using the keyboard. The program used +#: to open the URL is specified in open_url_with. + +# map kitty_mod+p>f kitten hints --type path --program - + +#: Select a path/filename and insert it into the terminal. Useful, for +#: instance to run git commands on a filename output from a previous +#: git command. + +# map kitty_mod+p>shift+f kitten hints --type path + +#: Select a path/filename and open it with the default open program. + +# map kitty_mod+p>l kitten hints --type line --program - + +#: Select a line of text and insert it into the terminal. Use for the +#: output of things like: ls -1 + +# map kitty_mod+p>w kitten hints --type word --program - + +#: Select words and insert into terminal. + +# map kitty_mod+p>h kitten hints --type hash --program - + +#: Select something that looks like a hash and insert it into the +#: terminal. Useful with git, which uses sha1 hashes to identify +#: commits + +# map kitty_mod+p>n kitten hints --type linenum + +#: Select something that looks like filename:linenum and open it in +#: vim at the specified line number. + +# map kitty_mod+p>y kitten hints --type hyperlink + +#: Select a hyperlink (i.e. a URL that has been marked as such by the +#: terminal program, for example, by ls --hyperlink=auto). + + +#: The hints kitten has many more modes of operation that you can map +#: to different shortcuts. For a full description see kittens/hints. +#: }}} + +#: Miscellaneous {{{ + +# map kitty_mod+f11 toggle_fullscreen +# map kitty_mod+f10 toggle_maximized +# map kitty_mod+u kitten unicode_input +# map kitty_mod+f2 edit_config_file +# map kitty_mod+escape kitty_shell window + +#: Open the kitty shell in a new window/tab/overlay/os_window to +#: control kitty using commands. + +# map kitty_mod+a>m set_background_opacity +0.1 +# map kitty_mod+a>l set_background_opacity -0.1 +# map kitty_mod+a>1 set_background_opacity 1 +# map kitty_mod+a>d set_background_opacity default +# map kitty_mod+delete clear_terminal reset active + +#: You can create shortcuts to clear/reset the terminal. For example:: + +#: # Reset the terminal +#: map kitty_mod+f9 clear_terminal reset active +#: # Clear the terminal screen by erasing all contents +#: map kitty_mod+f10 clear_terminal clear active +#: # Clear the terminal scrollback by erasing it +#: map kitty_mod+f11 clear_terminal scrollback active +#: # Scroll the contents of the screen into the scrollback +#: map kitty_mod+f12 clear_terminal scroll active + +#: If you want to operate on all windows instead of just the current +#: one, use all instead of active. + +#: It is also possible to remap Ctrl+L to both scroll the current +#: screen contents into the scrollback buffer and clear the screen, +#: instead of just clearing the screen, for example, for ZSH add the +#: following to ~/.zshrc: + +#: .. code-block:: sh + +#: scroll-and-clear-screen() { +#: printf '\n%.0s' {1..$LINES} +#: zle clear-screen +#: } +#: zle -N scroll-and-clear-screen +#: bindkey '^l' scroll-and-clear-screen + +# map kitty_mod+f5 load_config_file + +#: Reload kitty.conf, applying any changes since the last time it was +#: loaded. Note that a handful of settings cannot be dynamically +#: changed and require a full restart of kitty. You can also map a +#: keybinding to load a different config file, for example:: + +#: map f5 load_config /path/to/alternative/kitty.conf + +#: Note that all setting from the original kitty.conf are discarded, +#: in other words the new conf settings *replace* the old ones. + +# map kitty_mod+f6 debug_config + +#: Show details about exactly what configuration kitty is running with +#: and its host environment. Useful for debugging issues. + + +#: You can tell kitty to send arbitrary (UTF-8) encoded text to the +#: client program when pressing specified shortcut keys. For example:: + +#: map ctrl+alt+a send_text all Special text + +#: This will send "Special text" when you press the ctrl+alt+a key +#: combination. The text to be sent is a python string literal so you +#: can use escapes like \x1b to send control codes or \u21fb to send +#: unicode characters (or you can just input the unicode characters +#: directly as UTF-8 text). The first argument to send_text is the +#: keyboard modes in which to activate the shortcut. The possible +#: values are normal or application or kitty or a comma separated +#: combination of them. The special keyword all means all modes. The +#: modes normal and application refer to the DECCKM cursor key mode +#: for terminals, and kitty refers to the special kitty extended +#: keyboard protocol. + +#: Another example, that outputs a word and then moves the cursor to +#: the start of the line (same as pressing the Home key):: + +#: map ctrl+alt+a send_text normal Word\x1b[H +#: map ctrl+alt+a send_text application Word\x1bOH + +#: }}} + +#: }}} @@ -5,7 +5,6 @@ call plug#begin('~/.vim/plugged') Plug 'scrooloose/nerdtree' -Plug 'altercation/vim-colors-solarized' Plug 'vim-scripts/bufexplorer.zip' Plug 'ctrlpvim/ctrlp.vim' Plug 'pangloss/vim-javascript' @@ -16,6 +15,7 @@ Plug 'vim-airline/vim-airline' Plug 'vim-airline/vim-airline-themes' Plug 'tpope/vim-eunuch' Plug 'dense-analysis/ale' +Plug 'https://gitlab.com/protesilaos/tempus-themes-vim.git' call plug#end() @@ -125,21 +125,37 @@ nnoremap <leader>fv :BufExplorerVerticalSplit<Enter> " ctrlp let g:ctrlp_map ='<leader>a' -" solarized -nnoremap <leader>vl :let g:solarized_visibility="low" | colo solarized<Enter> -nnoremap <leader>vh :let g:solarized_visibility="high" | colo solarized<Enter> - " " visual " -let g:solarized_visibility="high" "trailing characters very visible -let g:solarized_menu=0 "don't show the gui menu -set synmaxcol=500 +"Use 24-bit (true-color) mode in Vim/Neovim when outside tmux. +"If you're using tmux version 2.2 or later, you can remove the outermost $TMUX check and use tmux's 24-bit color support +"(see < http://sunaku.github.io/tmux-24bit-color.html#usage > for more information.) +if (empty($TMUX)) + if (has("nvim")) + "For Neovim 0.1.3 and 0.1.4 < https://github.com/neovim/neovim/pull/2198 > + let $NVIM_TUI_ENABLE_TRUE_COLOR=1 + endif + "For Neovim > 0.1.5 and Vim > patch 7.4.1799 < https://github.com/vim/vim/commit/61be73bb0f965a895bfb064ea3e55476ac175162 > + "Based on Vim patch 7.4.1770 (`guicolors` option) < https://github.com/vim/vim/commit/8a633e3427b47286869aa4b96f2bfc1fe65b25cd > + " < https://github.com/neovim/neovim/wiki/Following-HEAD#20160511 > + if (has("termguicolors")) + set termguicolors + endif +endif + +" kitty terminal doesn't support bg blanking +" https://github.com/kovidgoyal/kitty/issues/108#issuecomment-320492663 +if ($TERM == 'xterm-kitty') + let &t_ut='' +endif + syntax on set background=light -silent! colo solarized "silent so it doesn't harf before it's installed +silent! colo tempus_dawn +let g:airline_theme='papercolor' set hlsearch " don't mess up gutter highlight with gitgutter @@ -147,16 +163,15 @@ highlight clear SignColumn hi! link SignColumn Background " Highlight non-ascii characters -" Run this late to override solarized +" Run this late to override theme if has("autocmd") highlight nonascii guibg=Red ctermbg=1 term=standout au BufReadPost * syntax match nonascii /[^\d0-\d127]/ endif -let g:airline_left_sep='' -let g:airline_left_alt_sep='|' -let g:airline_right_sep='' -let g:airline_right_alt_sep='|' +let g:airline_powerline_fonts = 1 +let g:airline_left_sep="\uE0B4" +let g:airline_right_sep = "\uE0B6" " " local additions |